• Sale!

    TBRCi Glock Micro Comp V3

    Rated 5.00 out of 5
    $89.00 $69.00
    INSTALLATION INSTRUCTIONS CLICK HERE

    LEAD TIMES

    Shoot faster and flatter with the TBRC Micro Comp! Also available for your .40 S&W NO weird thread pitches, NO proprietary barrels. Use what you've got! The TBRC Glock Micro Comp is threaded in the standard 1/2x28 thread pitch. It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels! The Micro Comp only adds about .45" to the end of your threaded barrel. Our comp was designed for the Glock 19 and when installed will fit in all Glock 34/35 holsters. Although the comp was designed around the Glock 19, it will work very well with any 9mm Glock and will function with any open ended holsters in the event the gun is longer than the holster. Comp mitigates recoil and keeps your gun flat throughout recoil. Shoot faster and flatter with the TBRC Micro Comp!
    Select options Details
  • Sale!
    INSTALLATION INSTRUCTIONS CLICK HERE

    LEAD TIMES

    Shoot faster and flatter with the TBRC Stubby Comp! NO weird thread pitches, NO proprietary barrels. Use what you've got! The TBRC Glock Stubby Comp is threaded in the standard 1/2x28 thread pitch. Therefore, It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels! The Stubby Comp only adds about .25" to the end of your threaded barrel (this will vary based on the spec of your barrel). Our comp was designed with the Glock 17 in mind but will work great on other 9mm Glocks! The Stubby Comp mitigates recoil and keeps your gun flat throughout recoil. The Stubby will sit flush with a TLR-1 on a Glock 19 and flush with an X300u on a Glock 17. If you are looking for the shortest overall package, the Glock 19 and TLR1 is the way to go.
    Select options Details
  • Sale! Glock 43 Micro Comp

    TBRCi Glock 43 Micro Comp

    Rated 5.00 out of 5
    $89.00 $69.00
    *Glock 43 Comps are currently at our anodizer and will ship as soon as they arrive" Shoot faster and flatter with the TBRC Micro Comp! NO weird thread pitches, NO proprietary barrels. Use what you've got! We took our ever popular Glock Micro Comp and sized it down specifically to fit the Glock 43. Because it is the same width as the 43 it will fit in most Glock 43 holsters. The TBRC Glock Micro Comp is threaded in the standard 1/2x28 thread pitch. Comp mitigates recoil and the "snap" that is so well known to Glock 43 shooters. Glock 43 Micro Comp has a beveled front face to aid in holstering and material added to the rear face to help close up the gap on barrels with longer threads and shoulders. Check out the article on Primary & Secondary about our G43 Micro Comp
    Add to cart Details
  • Sale!
      INSTALLATION INSTRUCTIONS CLICK HERE Shoot faster and flatter with the TBRC Micro Comp! NO weird thread pitches, NO proprietary barrels. Use what you've got! The TBRC M&P Micro Comp is threaded in the standard 1/2x28 thread pitch. It will work on most 9mm M&P barrels threaded in that pitch, including most 40-9 conversion barrels! The Micro Comp only adds about .50" to the end of your threaded barrel. Comp mitigates recoil and keeps your gun flat throughout recoil. Shoot faster and flatter with the TBRC Micro Comp!
    Add to cart Details
  • Sale!
    Out of stock
    AR15 A Salt Rifle Lower Receiver
      Blemished TBRCi Stripped AR15 A Salt Rifle Lower Receiver BLEMISHED. These are our Choice Receivers. This mean that they have some kind of cosmetic blemish. Blemishes are typically (not always) very minor but always purely cosmetic. IE: Chip in anodizing, dings, nicks. ALL SALES ON CHOICE RECEIVERS ARE FINAL PLEASE READ BELOW for transfer instructions.
    Details
  • Sale!

    TBRCi Glock Micro Comp V3 40 S&W

    Rated 5.00 out of 5
    $89.00 $69.00
    Shoot faster and flatter with the TBRC Micro Comp! NO weird thread pitches, NO proprietary barrels. Use what you've got! The TBRC Glock Micro Comp is threaded in the standard 9/16x24 thread pitch. It will work on most 40 S&W Glock barrels threaded in that pitch! The Micro Comp only adds about .45" to the end of your threaded barrel. Our comp was designed for the Glock 23 and when installed will fit in all Glock 34/35 holsters. Although the comp was designed around the Glock 23, it will work very well with any .40 S&W Glock and will function with any open ended holsters in the event the gun is longer than the holster. Comp mitigates recoil and keeps your gun flat throughout recoil. Shoot faster and flatter with the TBRC Micro Comp!  
    Add to cart Details
  • Sale! Glock 43 Stubby Comp SideGlock 43 Stubby Comp Top
    Shoot faster and flatter with the TBRC Micro Comp! Buy TWO and get FREE SHIPPING! NO weird thread pitches, NO proprietary barrels. Use what you've got! We took our ever popular Glock Micro Comp and sized it down specifically to fit the Glock 43. Because it is the same width as the 43 it will fit in most Glock 43 holsters. The TBRC Glock Micro Comp is threaded in the standard 1/2x28 thread pitch. Comp mitigates recoil and the "snap" that is so well known to Glock 43 shooters. Glock 43 Micro Comp has a beveled front face to aid in holstering and material added to the rear face to help close up the gap on barrels with longer threads and shoulders.
    Add to cart Details
  • Sale!
    Out of stock

    Save yourself $14 by getting a SiCo Barrel and TBRCi Micro Comp V3 together!

    Details
  • Out of stock
    We are currently machining lowers and are only making 100 available for individual sale so act FAST! TBRCi Stripped Lower Receiver Model 1836   ***Please allow 1-2 weeks for shipping
    Details
  • Sale!
    Out of stock
    Nickel Boron bolt carriers provide a smoother operation and are easier to clean surface over other types of BCG finishes. Makes an excellent upgrade to any AR-15.
    Details
  • Sale!
    Out of stock
      INSTALLATION INSTRUCTIONS CLICK HERE Shoot faster and flatter with the TBRC Micro Comp! The TBRC Walther PPQ Micro Comp is threaded in the standard 1/2x28 thread pitch designed specifically to match the Walther PPQ OEM barrel. The Micro Comp only adds about .50" to the end of your threaded barrel (this will vary based on the spec of your barrel). The Walther PPQ Micro Comp matches the design and profile of the PPQ for a perfect fit in PPQ holsters. When this comp is added to the 4" threaded barrel model PPQ it remains shorter than the 5" model. The Micro Comp is designed for the best possible fit with the OEM barrel for the smallest gap between the slide and comp possible (on most Walther PPQ OEM threaded barrels). Our Micro Comp mitigates recoil and keeps your gun shooting flatter throughout recoil.
    Details
  • Out of stock

    TBRCi Glock Micro Comp V3 Titanium

    Rated 5.00 out of 5
    $129.00

    NOW AVAILABLE!!

    INSTALLATION INSTRUCTIONS CLICK HERE All the same awesome features of our 7075-T6 Aluminum Micro comp but made from pure Titanium! We have listened to the feedback of our customers and have come up with the V3 Micro Comp. The V3 will fit a wider variety of holsters, including those that are made from CNC molds and formed to extremely tight tolerances. Shoot faster and flatter with the TBRC Micro Comp! Buy TWO and get FREE SHIPPING! NO weird thread pitches, NO proprietary barrels. Use what you've got! The TBRC Glock Micro Comp is threaded in the standard 1/2x28 thread pitch. It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels! The Micro Comp only adds about .45" to the end of your threaded barrel. Our comp was designed for the Glock 19 and when installed will fit in all Glock 34/35 holsters. Although the comp was designed around the Glock 19, it will work very well with any 9mm Glock and will function with any open ended holsters in the event the gun is longer than the holster. Comp mitigates recoil and keeps your gun flat throughout recoil. Shoot faster and flatter with the TBRC Micro Comp! Please allow 1-2 weeks for shipping on titanium comps. Ti comps do NOT come Flame Anodized.
    Details
  • Sale!
    Out of stock

    TBRC Choice Lower Receiver Mod1836

    Rated 5.00 out of 5
    $109.00 $75.00
    TBRCi Stripped Lower Receiver Model 1836 These are our Choice Receivers. This mean that they have some kind of cosmetic blemish. Blemishes are typically (not always) very minor but always purely cosmetic. IE: Chip in anodizing, dings, nicks. ALL SALES ON CHOICE RECEIVERS ARE FINAL
    Details
  • Four pack of set screws. - 6-32 Thread - 3/16" Long - Takes 1/16" Allen Key These set screws are for Micro Comps shipped prior to May 2017. For set screws for Micro Comps shipped May 2017 and later, please go HERE. If you are unsure of what set screws you have, please see the comparison image.
    Add to cart Details
  • Four pack of set screws. - 8-32 Thread - 3/16" Long - Takes 5/64" Allen Key These set screws are for Micro Comps shipped May 2017 and later. For set screws for Micro Comps shipped prior to May 2017, please go HERE. If you are unsure of what set screws you have, please see the comparison image.
    Add to cart Details
  • Sale!

    LIMITED TIME ONLY: FREE KEYMOD RAIL SECTION INCLUDED!!

    The TBRC ARS is a free float, light weight keymod rail designed for direct impingement rifles in pistol, carbine, mid-length, and rifle-length gas systems. PERFECT FOR 10.3"-10.5" PISTOL/SBR BUILDS   ***Please allow 2-3 weeks for these rails to ship. They are headed off for anodizing and will ship as soon as they get back to us.
    Add to cart Details
  • Sale!
    Out of stock
    5 Slot Keymod Rail Section. Covers 2 Keymod slots. Type III Hard Coat Anodized
    Details
  • Sale!
    Out of stock

    Save yourself $14 by getting a SiCo Barrel and TBRCi Comp together!

    Details
  • Sale!

    TBRC 1911 E-Grip

    $65.00 $59.00
    The 1911 E-Grip is designed by our C.E.O. who is a long time instructor and pro shooter. This is the grip he always wanted for enhanced weapon purchase and grip.
    Add to cart Details
  • Sale!

    LIMITED TIME ONLY: FREE KEYMOD RAIL SECTION INCLUDED!!

    The TBRC ARS is a free float, light weight keymod rail designed for direct impingement rifles in pistol, carbine, mid-length, and rifle-length gas systems. Be sure and pick up one or five of our Keymod Rail Sections as well PERFECT FOR 7.5" and 8" PISTOL/SBR BUILDS ***Please allow 2-3 weeks for these rails to ship. They are headed off for anodizing and will ship as soon as they get back to us.
    Add to cart Details
  • Out of stock

    Customize Your Upper

    Uppers come with T-Markings and TBRC Logo on top of receiver.

    Flat Top, M4 Upper Receiver with M4 Feedramps T-Markings and TBRC Logo laser etched into receiver. Receiver comes with ejection port and forward assist assembly preinstalled

    MADE IN THE USA
    Details
  • Out of stock
    ZEV Technologies PRO Mag-well 1st-4th Gen Glock® Aluminum one piece design in a matte black, smooth anodized finish.
    Details
  • Out of stock

    Customize Your Upper

    Uppers come with T-Markings and TBRC Logo on top of receiver.

    Flat Top, M4 Upper Receiver with M4 Feedramps T-Markings and TBRC Logo laser etched into receiver. Receiver comes with ejection port and forward assist assembly preinstalled

    These are TBRC Choice blemished upper receivers. Choice receivers have minor blemishes but are still 100% functional. Most people are surprised by the quality of our Choice receivers, often mistaking them for a Prime receiver. Blemishes are generally very minor. MADE IN THE USA
    Details
  • Out of stock
    FREE SHIPPING! It's ok to tell people you're compensating, they'll want to compensate too. Order your shirt today!! Pre-Order will end September 5th and shirts will begin shipping September 12th!
    Details
  • Sale!
    Out of stock
    Glock 19 Magwell Magazine Well
    TBRCi Micro Magwell, Glock Gen 1-3, Compact Frame (G19, 23, 32) Includes Magwell, plug and screws --Flared to help guide a magazine into the Glock magazine well aiding in smooth and fast reloads. --Deigned to be low profile in order to not hinder concealability. --Added benefit of the TBRCi Micro Magwell is the profile helps push your hand high and tight into the grip giving more control over the recoil of your weapon. --Works with Gen 1-3 Glock 19, 23 and 32 --Made from 7075-T6 Aluminum and finished in Type 3 hard coat anodizing right here in Texas, USA!
    Details
  • TBRCi Glock Reducing Ring For use with a 4th generation Glock model to retrofit back to a single guide-rod (Gen 3) and spring assembly. Made from 4140 Steel and finished in Black Nitride.
    Add to cart Details
  • TBRC Glock Guide Rod

    $25.00$50.00
    TBRCi Glock Guide Rods. -Machined from 4140 Steel and finished in Black Nitride. -Fits Gen 1-3 Glock 19/23/32 and can be used in Gen 4 19/23/32 with our Guide Rod Reducing Ring -Available in Fluted and Non-Fluted -Captured system allows guide rod to be easily installed and uninstalled from firearm
    Select options Details
  • Out of stock
    Alpha Wolf Glock19 Threaded Barrel
    Details
  • Sale!
    Out of stock
    SilencerCo 9mm Threaded Barrel Glock 19 1/2x28
    Details
  • FREE SHIPPING! FREE BRIM-IT with purchase of 3 or more shirts!! Get in on this shirt before it's gone!! Do American stuff. Pre-Order will run from 2-3 weeks, then we will begin producing these shirts in house!!
    Select options Details
  • Sale!
    Out of stock
    The TBRCi Glock trigger is a direct drop-in replacement for your 9mm, .40S&W or .357 Glock Gen 1-4. These triggers will begin shipping in 2-3 weeks, price will return to $119 when shipping begins. *Read Below For More Details
    Details
  • The TBRC ARS is a free float, light weight MLOK rail designed for direct impingement rifles in pistol, carbine, mid-length, and rifle-length gas systems. FREE SHIPPING Keymod more your style? Checkout our Keymod HERE!   ***Please allow up to 4 weeks for shipping
    Add to cart Details
  • Out of stock
    Details
  • Sale!
    Out of stock

    Save yourself $14 by getting a Zev Barrel and TBRCi Comp together!

    Details
  • Sale!
    Out of stock
    Perfect for building your AR15 upper receiver. Comes with properly installed and properly headspaced M4 barrel extension.
    Details
  • FREE SHIPPING! FREE BRIM-IT with purchase of 3 or more shirts!! Get in on this shirt before it's gone!! It's time to party like it's 1776! Pre-Order will run from 2-3 weeks, then we will begin producing these shirts in house!!
    Select options Details