SiCo Barrel and TBRCi Micro Comp V3 Combo

$289.00 $255.00

Out of stock

Save yourself $14 by getting a SiCo Barrel and TBRCi Micro Comp V3 together!

SKU: N/A Categories: , , ,


 TBRC Glock Micro Comp / Compensator V3 – 9mm

Shoot faster and flatter with the TBRC Micro Comp!

NO weird thread pitches, NO proprietary barrels. Use what you’ve got!

The TBRC Glock Micro Comp is threaded in the standard 1/2×28 thread pitch. Therefore, It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels! The Micro Comp only adds about .50″ to the end of your threaded barrel (this will vary based on the spec of your barrel). Our comp was designed for the Glock 19 and when installed will fit in all Glock 34/35 holsters. Although the comp was designed around the Glock 19, it will work very well with any 9mm Glock and will function with any open ended holsters in the event the gun is longer than the holster. Comp mitigates recoil and keeps your gun flat throughout recoil. Version 2 Micro Comp has a beveled front face to aid in holstering and material added to the rear face to help close up the gap on barrels with longer threads and shoulders.

Also available for your .40 S&W

Just like our Billet Receiver Sets and our AMR Handguards The Micro Comp is machined right here in Shiner, TX from AMERICAN MADE Billet 7075-T6 Aluminum and finished just up the road in Type III Hard Coat Anodizing. We believe strongly in supporting local and American industries. No cheap aluminum or steel for TBRC. All our material is certified made in the U.S.A.

Set screws index on your barrel’s shoulder, NOT the threads.

Weight: 0.8oz

Size: 1″ x 1.14″ x .78″

**Please note: Adding a compensator to your pistol sometimes requires some fine tuning. Because a compensator mitigates recoil, your slide may not be able to cycle completely. Performance is gun and ammo dependent. Example: I am running a 15lb recoil spring and a 5lb striker spring to ensure proper and reliable functionality. We do not recommend making these modifications without consulting a qualified Gunsmith first.

SilencerCo 9mm Threaded Barrel Glock 17/19 1/2×28


  • Improved accuracy
  • Threads add versatility to your pistol
  • Tough enough to hold up under the harshest conditions
  • Thread protector included


The only thing better than a normal pistol barrel is a threaded pistol barrel. All pistol silencers require one. SilencerCo noticed a market need for high quality pistol barrels and they stepped in to offer them.

Holding to the same commitment to quality as all SilencerCo’s products, the threaded barrels are tough enough to hold up under the harshest conditions. The barrels are constructed from 416R stainless steel and finished with a tough Black Nitride Finish.


Technical Information

Fit: Glock 19 (Compatible with Gen 3 & Gen 4 Glocks)

Caliber: 9mm Luger

Material: 416R Stainless Steel

Finish: Black Nitride

Length: 4.5″

Threads: 1/2″-28

Twist: 1 in 10″ RH

Additional information

Weight 1 lbs
Dimensions 5 x 2 x 2 in
Glock Model

Glock 17, Glock 19, Glock 34


There are no reviews yet.

Be the first to review “SiCo Barrel and TBRCi Micro Comp V3 Combo”

Your email address will not be published. Required fields are marked *