TBRC Glock Micro Comp / Compensator V2 – 9mm
Shoot faster and flatter with the TBRC Micro Comp!
NO weird thread pitches, NO proprietary barrels. Use what you’ve got!
The TBRC Glock Micro Comp is threaded in the standard 1/2×28 thread pitch. Therefore, It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels! The Micro Comp only adds about .50″ to the end of your threaded barrel (this will vary based on the spec of your barrel). Our comp was designed for the Glock 19 and when installed will fit in all Glock 34/35 holsters. Although the comp was designed around the Glock 19, it will work very well with any 9mm Glock and will function with any open ended holsters in the event the gun is longer than the holster. Comp mitigates recoil and keeps your gun flat throughout recoil. Version 2 Micro Comp has a beveled front face to aid in holstering and material added to the rear face to help close up the gap on barrels with longer threads and shoulders.
Just like our Billet Receiver Sets and our AMR Handguards The Micro Comp is machined right here in Shiner, TX from AMERICAN MADE Billet 7075-T6 Aluminum and finished just up the road in Type III Hard Coat Anodizing. We believe strongly in supporting local and American industries. No cheap aluminum or steel for TBRC. All our material is certified made in the U.S.A.
Set screws index on your barrel’s shoulder, NOT the threads.
Size: 1″ x 1.14″ x .78″
**Please note: Adding a compensator to your pistol sometimes requires some fine tuning. Because a compensator mitigates recoil, your slide may not be able to cycle completely. Performance is gun and ammo dependent. Example: I am running a 15lb recoil spring and a 5lb striker spring to ensure proper and reliable functionality. We do not recommend making these modifications without consulting a qualified Gunsmith first. The fit of the Micro Comp will vary based on the spec of you particular threaded barrel. Some barrels will allow the comp to fit more closely to the slide than others.
Please allow 2-3 weeks for shipping.
SilencerCo 9mm Threaded Barrel Glock 19 1/2×28
- Improved accuracy
- Threads add versatility to your pistol
- Tough enough to hold up under the harshest conditions
- Thread protector included
ZEV Technologies PRO Mag-well 1st-4th Gen Glock®
Aluminum one piece design in a matte black, smooth anodized finish.
Includes mag-well, screw and wrench.
–The mag-well is slightly flared at the base to be wider than the stock opening, which is ideal for quickly inserting the magazine in the pistol during reloads helping build proper muscle memory for improved consistency and reload time.
–This ZEV Technologies PRO Mag-well is a great addition for any shooter looking for an edge with out the bulk flared competition style mag-well.
–The addition of a mag-well will help keep the users hands in place while shooting.
–Generation 4 back straps may need to be modified if used with this product, back straps must have bottom internal tabs trimmed.
ZEV Technologies™ parts always incorporate design, feel and performance.
Finally, all ZEV Mag-well components are designed to last, ZEV products are machined using quality aluminum materials.
- High-performance LED is regulated to maximize tactical-level output and runtime per set of batteries
- TIR lens creates focused high-intensity beam for close- to longer-range applications
- Integral aluminum T-slot mounting system offers rock-solid attachment to railed hand guns and long guns equipped with MIL-STD 1913 rails
- Weatherproof—O-ring and gasket sealed
- Construction—High-strength aerospace aluminum with Mil-Spec anodizing; coated, tempered window
**Buyer may receiver Surefire X300U-a or X300U-B depending on stock**