TBRC Glock 43 Micro Comp / Compensator For Glock 43 – 9mm
Shoot faster and flatter with the TBRC Glock 43 Micro Comp!
NO weird thread pitches, NO proprietary barrels. Use the threaded barrel you’ve got!
We took our ever popular Glock Micro Comp and sized it down specifically to fit the size and shape of the Glock 43. Because it is the same width and profile as the 43’s slide it will fit in most Glock 43 holsters. The TBRC Glock Micro Comp is threaded in the standard 1/2×28 thread pitch. By directing expanding gases upwards our comp mitigates recoil, muzzle rise and the “snap” that is so well known to Glock 43 shooters. Glock 43 Micro Comp has a beveled front face to aid in holstering and material added to the rear face to help close up the gap on barrels with longer threads and shoulders. This comp really changes the dynamics of the Glock 43 and in our opinion, greatly improves the shootability of the micro pistol. Check out the article on Primary & Secondary about our G43 Micro Comp and the benefit it provides.
Just like our Billet Receiver Sets and our AMR Handguards, all of our comps are machined right here in Shiner, TX from AMERICAN MADE Billet 7075-T6 Aluminum and finished just up the road in Type III Hard Coat Anodizing. We believe strongly in supporting local and American industries. No cheap aluminum or steel for TBRC. All our material is certified made in the U.S.A. and our Type III anodizing is the best in the business.
This comp is to be installed with red loctite only. There are no set screws involved with installation of the Glock 43 comp due to the size of available threaded barrels.
Size: .86″ x 1.14″ x .78″