TBRCi Glock Micro Comp V3 40 S&W

$89.00 $69.00

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

Shoot faster and flatter with the TBRC Micro Comp!

NO weird thread pitches, NO proprietary barrels. Use what you’ve got!
The TBRC Glock Micro Comp is threaded in the standard 9/16×24 thread pitch. It will work on most 40 S&W Glock barrels threaded in that pitch! The Micro Comp only adds about .45″ to the end of your threaded barrel. Our comp was designed for the Glock 23 and when installed will fit in all Glock 34/35 holsters. Although the comp was designed around the Glock 23, it will work very well with any .40 S&W Glock and will function with any open ended holsters in the event the gun is longer than the holster. Comp mitigates recoil and keeps your gun flat throughout recoil. Shoot faster and flatter with the TBRC Micro Comp!

Please allow 1-2 weeks for shipping.

SKU: TBRC-Micro-Comp-V3-40SW Categories: , , , , ,

Description

 TBRC Glock Micro Comp / Compensator V3 – 40 S&W

Shoot faster and flatter with the TBRC Micro Comp!

We have listened to the feedback of our customers and have come up with the V3 Micro Comp. The V3 will fit a wider variety of holsters, including those that are made from CNC molds and formed to extremely tight tolerances.

NO weird thread pitches, NO proprietary barrels. Use what you’ve got!

The TBRC Glock Micro Comp for .40 S&W is threaded in the standard 9/16X24 thread pitch. Therefore, It will work on most .40 S&W Glock barrels threaded in that pitch. The TBRCi Micro Comp only adds about .50″ to the end of your threaded barrel (this will vary based on the spec of your barrel). Our comp was designed for the Glock 23 and when installed will fit in all Glock 34/35 holsters. Although the comp was designed around the Glock 23, it will work very well with any .40 S&W Glock and will function with any open ended holsters in the event the gun is longer than the holster. Comp mitigates recoil and keeps your gun flat throughout recoil.

Just like our Billet Receiver Sets and our AMR Handguards The Micro Comp is machined right here in Shiner, TX from AMERICAN MADE Billet 7075-T6 Aluminum and finished just up the road in Type III Hard Coat Anodizing. We believe strongly in supporting local and American industries. No cheap aluminum or steel for TBRC. All our material is certified made in the U.S.A.
Set screws index on your barrel’s shoulder, NOT the threads.

Weight: 0.8oz

Size: 1″ x 1.14″ x .78″

**Please note: Adding a compensator to your pistol sometimes requires some fine tuning. Because a compensator mitigates recoil, your slide may not be able to cycle completely. Performance is gun and ammo dependent. Example: I am running a 15lb recoil spring and a 5lb striker spring to ensure proper and reliable functionality. Some Gen4 guns need Gen3 RSA’s, some do not. We do not recommend making these modifications without consulting a qualified Gunsmith first. The fit of the Micro Comp will vary based on the spec of you particular threaded barrel and Glock slide/frame. Some barrels will allow the comp to fit more closely to the slide than others.

Additional information

Weight .75 lbs
Dimensions 4 x 4 x 2 in

1 review for TBRCi Glock Micro Comp V3 40 S&W

  1. Rated 5 out of 5

    (verified owner)

    Works good on my Glock 40 mos 10mm with lonewolf threaded barrel, takes the edge off of the recoil. I was able to get back to Target faster. Needed to do some minor fitting to make it flush to slide. Hoping to see one for the mighty 10mm someday.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • Out of stock
    Details