TBRC M&P Micro Comp / Compensator V2 – 9mm
Shoot faster and flatter with the TBRC Micro Comp!
NO weird thread pitches, NO proprietary barrels. Use what you’ve got!
The TBRC M&P Micro Comp is threaded in the standard 1/2×28 thread pitch. Therefore, It will work on most 9mm M&P barrels threaded in that pitch, including most 40-9 conversion barrels! The Micro Comp only adds about .50″ to the end of your threaded barrel (this will vary based on the spec of your barrel). Comp mitigates recoil and keeps your gun flat throughout recoil. Version 2 Micro Comp has a beveled front face to aid in holstering and material added to the rear face to help close up the gap on barrels with longer threads and shoulders.
Just like our Billet Receiver Sets and our AMR Handguards The Micro Comp is machined right here in Shiner, TX from AMERICAN MADE Billet 7075-T6 Aluminum and finished just up the road in Type III Hard Coat Anodizing. We believe strongly in supporting local and American industries. No cheap aluminum or steel for TBRC. All our material is certified made in the U.S.A.
This comp is to be installed with red loctite only. There are no set screws involved with installation of the M&P comp due to the size of available threaded barrels.
Size: 1″ x 1.14″ x .78″
**Please note: Adding a compensator to your pistol sometimes requires some fine tuning. Because a compensator mitigates recoil, your slide may not be able to cycle completely. Performance is gun and ammo dependent. We do not recommend making these modifications without consulting a qualified Gunsmith first. The fit of the Micro Comp will vary based on the spec of you particular threaded barrel. Some barrels will allow the comp to fit more closely to the slide than others.