TBRCi Stubby Comp for Glocks

$89.00 $69.00

Available on backorder

INSTALLATION INSTRUCTIONS
CLICK HERE

LEAD TIMES

Shoot faster and flatter with the TBRC Stubby Comp!

NO weird thread pitches, NO proprietary barrels. Use what you’ve got! The TBRC Glock Stubby Comp is threaded in the standard 1/2×28 thread pitch. Therefore, It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels! The Stubby Comp only adds about .25″ to the end of your threaded barrel (this will vary based on the spec of your barrel). Our comp was designed with the Glock 17 in mind but will work great on other 9mm Glocks! The Stubby Comp mitigates recoil and keeps your gun flat throughout recoil.

The Stubby will sit flush with a TLR-1 on a Glock 19 and flush with an X300u on a Glock 17. If you are looking for the shortest overall package, the Glock 19 and TLR1 is the way to go.

SKU: TBRC-GLK-9MM-STBY-BLK Categories: , , , ,

Description

TBRC Stubby Comp, Glock Compensator – 9mm

Shoot faster and flatter with the TBRC Stubby Comp!

We took our standard Glock Micro Comp and made some adjustments to it to better fit Glock 17/22 Pistols. We removed the front top port to size it down. We widened the top port and shortened the side port to allow as much upward blast as possible. These modifications make for a very effective compensator even being as small as it is. The Stubby Comp will still remain shorter than an X300U on most aftermarket barrels (Will extended past light when using longer barrels such as KKM, Blacklist and Lonewolf) This allows you to comp your 17/22 while keeping a profile similar to the Glock 34. This set up is just a hair longer than a 34 so it will not work in all 34 holsters but does work on many of the popular 34/Roland Special holsters available on the market (please view images). The Comp will generally just barely extended past the bottom of the holster (please view photos for reference)

NO weird thread pitches, NO proprietary barrels. Use what you’ve got!

The TBRC Glock Micro Comp is threaded in the standard 1/2×28 thread pitch. Therefore, It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels! The Micro Comp only adds about .25″ to the end of your threaded barrel (this will vary based on the spec of your barrel). Our comp was designed with the Glock 17 in mind but will work great on other 9mm Glocks! The Stubby Comp mitigates recoil and keeps your gun flat throughout recoil.

Also available for your .40 S&W

Just like our Billet Receiver Sets and our AMR Handguards The Stubby Comp is machined right here in Shiner, TX from AMERICAN MADE Billet 7075-T6 Aluminum and finished just up the road in Type III Hard Coat Anodizing. We believe strongly in supporting local and American industries. No cheap aluminum or steel for TBRC. All our material is certified made in the U.S.A.

Set screws index on your barrel’s shoulder, NOT the threads.

Weight: 0.8oz

Size: 1″ x .92″ x .78″

**Please note: Adding a compensator to your pistol sometimes requires some fine tuning. Because a compensator mitigates recoil, your slide may not be able to cycle completely. Performance is gun and ammo dependent. Example: I am running a 15lb recoil spring and a 5lb striker spring to ensure proper and reliable functionality. Some Gen4 guns need Gen3 RSA’s, some do not. We do not recommend making these modifications without consulting a qualified Gunsmith first. The fit of the Micro Comp will vary based on the spec of you particular threaded barrel and Glock slide/frame. Some barrels will allow the comp to fit more closely to the slide than others.

Additional information

Weight .75 lbs
Dimensions 4 x 4 x 2 in
Thread Pitch

1/2×28 (Standard), 13.5×1 (Commie)

You may also like…

  • Sale!
    Out of stock
    Glock 19 Magwell Magazine Well
    Details
  • Out of stock
    Details