TBRCi Walther PPQ Micro Comp

$89.00 $69.00

Out of stock

 

INSTALLATION INSTRUCTIONS
CLICK HERE

Shoot faster and flatter with the TBRC Micro Comp!

The TBRC Walther PPQ Micro Comp is threaded in the standard 1/2×28 thread pitch designed specifically to match the Walther PPQ OEM barrel. The Micro Comp only adds about .50″ to the end of your threaded barrel (this will vary based on the spec of your barrel). The Walther PPQ Micro Comp matches the design and profile of the PPQ for a perfect fit in PPQ holsters. When this comp is added to the 4″ threaded barrel model PPQ it remains shorter than the 5″ model. The Micro Comp is designed for the best possible fit with the OEM barrel for the smallest gap between the slide and comp possible (on most Walther PPQ OEM threaded barrels). Our Micro Comp mitigates recoil and keeps your gun shooting flatter throughout recoil.

Out of stock

SKU: TBRC-PPQ-9MM-COMP-BLACK Categories: ,

Description

 TBRC Walther PPQ Micro Comp / Compensator – 9mm

Shoot faster and flatter with the TBRC Micro Comp!

NO weird thread pitches, NO proprietary barrels. Use what you’ve got!

The TBRC Walther PPQ Micro Comp is threaded in the standard 1/2×28 thread pitch designed specifically to match the Walther PPQ OEM barrel. The PPQ Comp only adds about .50″ to the end of your threaded barrel (this will vary based on the spec of your barrel). The Walther PPQ Micro Comp matches the design and profile of the PPQ for a perfect fit in most PPQ holsters. When this comp is added to the 4″ threaded barrel model PPQ it remains shorter than the 5″ model. The PPQ Comp is designed for the best possible fit with the OEM barrel for the smallest gap between the slide and comp possible (on most Walther PPQ OEM threaded barrels). Our Micro Comp mitigates recoil and keeps your gun shooting flatter throughout recoil.

Just like our Billet Receiver Sets and our AMR Handguards The Micro Comp is machined right here in Shiner, TX from AMERICAN MADE Billet 7075-T6 Aluminum and finished just up the road in Type III Hard Coat Anodizing. We believe strongly in supporting local and American industries. No cheap aluminum or steel for TBRCi. All our material is certified made in the U.S.A.

Set screws index on your barrel’s shoulder, NOT the threads.

Weight: 0.8oz

Size: .88″ x .90″ x 1.08″

**Please note: Adding a compensator to your pistol sometimes requires some fine tuning. Because a compensator mitigates recoil, your slide may not be able to cycle completely. Performance is gun and ammo dependent. We have found that the PPQ Micro Comp functions great with the OEM Recoil Spring Assembly on our PPQ’s. This may not be the case for your weapon or ammo.

Additional information

Weight .75 lbs
Dimensions 4 x 4 x 2 in
Thread Pitch

1/2×28 (Standard), 13.5×1 (Commie)

Reviews

There are no reviews yet.

Be the first to review “TBRCi Walther PPQ Micro Comp”

Your email address will not be published. Required fields are marked *

You may also like…

  • Out of stock
    Details