Save yourself $14 by getting a Zev Barrel and TBRCi Comp together!
Zev Barrel and TBRCi Micro Comp Combo 9mm
Out of stock
Out of stock
Enter email to get notified when these are back in stock!
TBRC Glock Micro Comp / Compensator V2 – 9mm
Shoot faster and flatter with the TBRC Micro Comp!
NO weird thread pitches, NO proprietary barrels. Use what you’ve got!
The TBRC Glock Micro Comp is threaded in the standard 1/2×28 thread pitch. Therefore, It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels! The Micro Comp only adds about .50″ to the end of your threaded barrel (this will vary based on the spec of your barrel). Our comp was designed for the Glock 19 and when installed will fit in all Glock 34/35 holsters. Although the comp was designed around the Glock 19, it will work very well with any 9mm Glock and will function with any open ended holsters in the event the gun is longer than the holster. Comp mitigates recoil and keeps your gun flat throughout recoil. Version 2 Micro Comp has a beveled front face to aid in holstering and material added to the rear face to help close up the gap on barrels with longer threads and shoulders.
Just like our Billet Receiver Sets and our AMR Handguards The Micro Comp is machined right here in Shiner, TX from AMERICAN MADE Billet 7075-T6 Aluminum and finished just up the road in Type III Hard Coat Anodizing. We believe strongly in supporting local and American industries. No cheap aluminum or steel for TBRC. All our material is certified made in the U.S.A.
Set screws index on your barrel’s shoulder, NOT the threads.
Size: 1″ x 1.14″ x .78″
**Please note: Adding a compensator to your pistol sometimes requires some fine tuning. Because a compensator mitigates recoil, your slide may not be able to cycle completely. Performance is gun and ammo dependent. Example: I am running a 15lb recoil spring and a 5lb striker spring to ensure proper and reliable functionality. We do not recommend making these modifications without consulting a qualified Gunsmith first.
Please allow 1-2 weeks for shipping.
ZEV Tech G19 9mm Threaded Barrel
ZEV Technologies Pro Match Grade drop-in barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant.
ZEV Pro Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.0002” for consistency and accuracy.
The barrels are cut rifled and 100% inspected for groove dimensions and broach finish.
- 416R gun barrel quality stainless steel
- Match grade drop in barrel
- Final dimension of +/- 0.0002” for unmatched accuracy
Material: 416R Stainless Steel
Finish: Grey DLC Coating
Caliber: 9mm Luger
Muzzle Thread Pattern: 1/2″-28
|Dimensions||8 x 4 x 2 in|
Glock 17, Glock 19, Glock 34